Gesture and Motion Evaluation Kits (Digital) USEQMSK_____00
The above information is believed to be correct but does not purport to be all inclusive and must be used only as a guide.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL
33301 USA • 954-766-2800 • www.kemet.com
10
The faster the gesture, the closer together the peaks in the signals are. If the signal peaks are
small (can be caused by the hand temperature being close to background temperature), it is
recommended to reduce the sensitivity in the settings window as will be described later.
5.2
Gesture Trigger Threshold Option
Setting the threshold for gestures to be lower will cause a greater chance of false gestures
being registered caused by noise. And setting too high will make registering actual gestures
less likely.
5.3
Gesture Detection Algorithm Peak Spread
•
How far apart the peaks in signals can be before considered a gesture. The larger the
value used, the more the system is affected by noise.
•
Range:
1 to 400
•
Typical:
12
6
PRESENCE DETECTION MODE
A presence event is one that simply states that an object of higher temperature than the
background radiation has come into or moved out of the FoV of the sensor.
