5
Direct Operation (Portable HRI Mode) Illustration
WIRES-X Node Station
C4FM Digital
Analog FM
WIRES-X Room
Digital Node Station
C4FM Digital
Digital Node Station
Analog Node Station
Analog FM
Analog Node Station
Press the PTT switch on
the transceiver connected
to the PC to communicate.
Portable Digital Node Station
With the WIRES-X Portable Digital Node function, you cannot operate a a WIRES-X Room (Including a digital room) or
use the remote-control function from the outside.
System Requirements (Operating Environment)
Supported Transceiver
•
FT2D
（
As of Dec 2018
）
Connection Cable
•
SCU-39
WIRES-X Connection Cable Kit (Option)
（
The SCU-39 includes SCU-19 and CT-44, and two audio cables.
）
The latest WIRES-X Software and Transceiver Firmware
Update to the latest software and firmware on YAESU website.
• WIRES-X Software
：
Ver.1.500 or later
• FT2D
MAIN: Ver.3.10 or later, SUB: Ver.2.01 or later, DSP: Ver.4.31 or later
PC
• OS
：
Microsoft
®
Windows
®
7 / 8.1 / 10
• Processor Clock Frequency
：
2.0 GHz or faster
• HDD
：
1 GB or more of available space
• RAM
：
2 GB or more
• Display resolution
：
1366 x 768 16-bit high color or higher (32-bit true color is recommended)
• USB port
：
USB 2.0 (Full Speed)
• LAN port
：
100BASE-TX/1000BASE-T or Wi-Fi
：
IEEE 802.11 b or higher
• Audio Interfaces*
1
*
1
Sound function is also required when using the “Portable Digital Node mode” or “Portable HRI Mode”.
Furthermore, when communicating in “Direct Operation” in “Portable HRI Mode”, the sound function of the
personal computer to be used must have the function “audio input from the microphone terminal pass to the
speaker output” function.
•
3.5 Φ speaker terminal, 3.5 Φ microphone terminal.
*2
(It is necessary only for Internet communication in “Portable
HRI Mode”.)
*2
In the case of a dedicated terminal such as a laptop, convert it to a 3.5 Φ speaker terminal and 3.5 Φ microphone
terminal with a commercially available conversion cable.
• Speaker (It is necessary only when communicating in “Direct Operation” in “Portable HRI Mode”.)
Internet Connection
• ADSL 8 Mbps or faster (No fixed or dynamic global IP address is required.)
When the Internet line speed is low or unstable, the sound may be interrupted or the connection of the WIRES-X
connection may become unstable.
