VX-8GR/GE O
PERATING
M
ANUAL
60
To initiate Preferential Memory Scan:
1.
Press the
c
key briefly to enter the Memory Recall (“MR”) mode, if you are not
using memories already.
2.
Rotate the
DIAL
knob to select any channel which has a
blinking “
⊳
” icon appended to the channel number.
3.
Press and hold in the
B
key, then rotate the
DIAL
knob
while
holding in the
B
key
(the current Memory Scan
mode will appear on the frequency display) to select the
desired Memory Scan mode. Available selections are
ALL
CH
(
ONLY
)
,
TAG1
(
ONLY
)
,
TAG2
(
ONLY
)
,
BAND
(
ONLY
)
, and
PMS-X
.
ALL CH
: The scanner sweeps all Preferential Scan Channels.
TAG1
:
The scanner sweeps only those Preferential Scan Channels with the same
first digit of the alpha/numeric tag as the first channel on which scanning
started.
TAG2
:
The scanner sweeps only those Preferential Scan Channels with the same
first and second digits of the alpha/numeric tag as the first channel on which
scanning started.
BAND
: The scanner sweeps only those Preferential Scan Channels which are memo-
rized on the same operating band as the first channel on which scanning
started.
PMS-X
: The scanner will sweep frequencies within the currently-selected PMS fre-
quency pair. This is not a Preferential Memory Scan, see page 62 for details.
4.
Release the
B
key to start scanning.
When there are no memory channels corresponding to the selected Memory Scan
mode, the “
MS ERR
” notation will appear on the display.
5.
To cancel scanning, press the
PTT
switch or
c
key.
M
EMORY
S
CANNING
S
CANNING
