FT-60R O
PERATING
M
ANUAL
38
Preferential Memory Scan
The
FT-60R
also allows you to set up a “Preferential Scan List” of channels which you can
“flag” within the memory system. These channels are designated by a blinking “
” icon
when you have selected them, one by one, for the Preferential Scan List.
Here is the procedure for setting up and using the Preferential Scan List:
1.
Recall the Memory Channel which you wish to add to the Preferential Scan List.
2.
Press the [
F/W
] key, then press the [
0
(
)
SET
] key to enter the Set mode.
3.
Rotate the
DIAL
knob to select Set Mode Item 46:
SKIP
.
4.
Press the [
F/W
] key momentarily to enable adjustment of this
Set Mode Item.
5.
Rotate the
DIAL
knob so as to select “
ONLY
.”
6.
When you have made your selection, press the
PTT
key to save
the settings and exit to normal operation.
7.
To remove a channel from the Preferential Scan List, just repeat the above procedure,
rotating the
DIAL
knob to select “
OFF
” in step 5 above.
In the factory default configuration, you may recall Set Mode Item 46: SKIP by press-
ing [F/W]
[8(P2)].
To initiate Preferential Memory Scan:
1.
Press the [
F/W
] key, then press the [
0
(
)
SET
] key to enter the Set mode.
2.
Rotate the
DIAL
knob to select Set Mode Item 43:
SCN MD
.
3.
Press the [
F/W
] key momentarily to enable adjustment of this
Set Mode Item.
4.
Rotate the
DIAL
knob so as to select “
ONLY
.”
5.
Press the
PTT
key to save the settings and exit to normal opera-
tion.
6.
Now, press and hold in either the [
(
MHz
)] or [
(
MHz
)] key for one second to
initiate the Preferential Memory Scan. Only the channels which have the blinking “
”
icon appended to the channel number will be scanned.
7.
To cancel the Preferential Memory Scan, just repeat the above procedure, rotating the
DIAL
knob to select “
MEM
” in step 4 above.
M
EMORY
S
CANNING
S
CANNING
