Yaesu VX-3R Operating Manual Download Page 104

Page: 104 / 132

VX-3R O

PERATING

ANUAL

102

The

VX-3R

includes a convenient “Clone” feature, which allows the memory and configu-

ration data from one transceiver to be transferred to another

VX-3R

. This can be particu-

larly useful when configuring a number of transceivers for a public service operation. Here
is the procedure for Cloning one radio’s data to another:

1. Turn both radios off.
2. Connect the optional

CT-27

Clone Cable between the

MIC/SP

jacks of the two ra-

dios.

3. Press and hold in the [

F/W

] key while turning the radios on. Do

this for both radios (the order of switch-on does not matter).
“

CLONE

” will appear on the displays of both radios when the

Clone mode is successfully activated in this step.

4. On the Destination radio, press the [

V/M

] key (“

----- WAIT

WAIT

WAIT -----

” will

appear on the LCD).

5. Press the [

BAND

] key on the Source radio; “

----- ----- TX

TX ----- -----

” will ap-

pear on the Source radio, and the data from this radio will be
transferred to the other radio.

6. If there is a problem during the cloning process, “

ERROR

” will

be displayed. Check your cable connections and battery voltage,
and try again.

7. If the data transfer is successful, the Destination radio returns to normal operation and

“

CLONE

” will reappear on the Source radio.

8. Turn both radios off and disconnect the cloning cable. You can then turn the radios

back on, and begin normal operation.

LONING

CT-27

Clone Cable

Summary of Contents for VX-3R





































































































































Search results

Summary of Contents for VX-3R

Reviews:

Yaesu VX-3R, Operating Manual, Page: 104 / 132

Search results

Summary of Contents for VX-3R

Reviews: