operation modes for your choice (B1, C1, F1, ***, HAM, H1, A1, etc.):
!!Remember to record what mode you're initially in!!
For SECOND MENU (A3, B3, C3, D3, ***, HAM, etc...) OR (A1, B1, C1, D1, H1, ***, HAM, etc...) Turn the dial and press MODE
then press F/W to set.
Your rig is now operates on a new mode!
*If you choose *** and press F/W, you will have an even wider TX
range, but Radio disabled. Others not tried yet, and I guess different version has different modes/ranges/settings
*If you want to restore your mode, follow all steps above and set it back to your recorded mode in step 4.
When you set *** mode you wheel have TX from 120-220 & 300-576Mhz but you must remove jumper from board, you can find it on
second side behind battery, behind black sticker.
TX from 140-174 & 420-470 remove jumper!!!! and do master reset! Reset is:
Microprocessor Reset on Page 128 of the Manual kills all memories and settings Microprocessor Reset on Page 128 of the Manual kills
all memories and settings
Power Off Power Off
Hold [MODE] + [V/M] and Power On Hold [MODE] + [V / M] and Power On
Press [F/W] Press [B / W] GOOD LOCK
VX-3E
Mods from I6IBE
Click on Link
ATTENTION
The KB2LJJ takes no responsibility for any damage during the modification or for any wrong information made
on this modification.
KB2LJJ Radio Mods Database and Manuals
http://www.kb2ljj.com/data/yaesu/VX-3R.htm
2 dari 2
06/11/2009 19:29
