P.3
COMPONENT IDENTIFICATION
TRANSMITTER
SPEAKER RECEIVERS
Antenna
Signal (Green) Power (Red)
P.4
INSTALLATION
TRANSMITTER
1. Insert the antenna tube into the antenna wire.
2. Connect the supplied AC power adaptor to an electrical wall outlet.
3. Plug the AC power adaptor in the DC jack located on the rear of the
transmitter. The Power LED (Red) will on.
4. The rear of the transmitter has one audio cord that can be connected to
audio output jack of TV, Monitor, VCR, Radio recorder, CD / MP3 / VCD /
DVD players or to headphone / earphone jack with the connector
provided.
Plug the adaptor in the AC source and connect the audio plug to the audio
source. As soon as the transmitter is receiving the audio signal, it will
automatically switch on and the Signal LED (Green) will illuminate.
