Yaesu PCC-2000, Reference Book

Page: 18 / 26

PCC-2000 R
EFERENCE
B
OOK
- 18 -
O
PERATION OF
M
ISCELLANEOUS
K
NOBS AND
B
UTTONS
[
METER
]
K
NOB
Click the left mouse button on the [ METER
] knob, then turn the
mouse scroll or press the left/right buttons to select the function
of the meter during transmission.
[
MIC
]
K
NOB
Click the left mouse button on the [
MIC
] knob (the indication
color of “MIC” will turn yellow), then turn the mouse scroll or
press the left/right buttons to select the Microphone gain level.
[
RF PWR
]
K
NOB
Click the left mouse button on the [ RF PWR
] knob (the indica-
tion color of “RF PWR” will turn yellow), then turn the mouse
scroll or press the left/right buttons to set the desired output power.
[
DIM
]
B
UTTON
Click the left mouse button on the [ DIM
] button to toggle the
illumination level of the Meter/Display between “Hi” and “Low.”
[
MOX
]
B
UTTON
Click the left mouse button on the [
MOX
] button to engage trans-
mission. When the MOX circuit is set to on, the inside of the
button glows red.
[
SPOT
]
B
UTTON
Click the left mouse button on the [ SPOT
] button to turn on the
CW receiver spotting tone.
[
A
]
B
UTTON
When this button glows red, the following buttons are active on
the Main Band (VFO-A).
ˆ
[
MODE
] Button
ˆ
[
BAND
] Button
ˆ
[
NAR
] Button
ˆ
[
AGC
] Button
ˆ
[
NB
] Button
ˆ
[
NB
] Knob
[
B
]
B
UTTON
Click the left mouse button on the [
B
] button to turn the button
orange for five seconds. When this button glows orange, the fol-
lowing buttons are active on the Sub Band (VFO-B).
ˆ
[
MODE
] Button
ˆ
[
BAND
] Button
ˆ
[
NAR
] Button
ˆ
[
AGC
] Button
ˆ
[
NB
] Button
ˆ
[
NB
] Knob
[
MIC
] knob [
RF PWR
] knob
[
METER
] knob
[
DIM
] button
[
MOX
] button
[
SPOT
] button
[
B
] button [
A
] button