Yaesu M-100, Manual, Page: 5 / 12

3
Safety Precautions
M-100 Operating Manual
Do not pull on the cable section when
disconnecting the power supply cable or
connection cable.
Doing so could cause fire, electric shock or
damage to the equipment. Hold the plug or
the connector when disconnecting the cable.
Do not use the power supply cable or con-
nection cable if it is damaged or if the con-
nection of the power connector is loose.
Doing so could cause fire, electric shock or
damage to the equipment. Contact your deal-
er or our customer support.
CAUTION
Do not place the unit on an unstable place
or a place subject to much vibration.
The unit may fall or tip over, resulting in fire,
injury or malfunction.
Do not place heavy objects on top of the
unit.
The unit may fall or tip over, resulting in injury.
Do not place objects containing water,
such as vases, cosmetics or cups, on top
of the unit.
The water may spill and get inside the unit,
resulting in fire or malfunction.
Do not place the unit in humid or dusty
places.
Doing so could cause fire or malfunction.
Do not wipe the case with thinner or ben-
zene.
Use a soft, dry cloth to wipe dirt off the case.
Do not drop the unit or subject it to strong
shocks.
Doing so could cause injury or malfunction.
Disconnect the power supply cable and
all cables connecting the unit to the radio
before moving the microphone.
Do not place the unit in places exposed to
direct sunlight or near heating appliances.
Doing so could cause deformation, discolor-
ation, etc.
Store in a place out of the reach of small
children.
Failure to do so could result in injury, etc.
Do not use products other than those
specified by Yaesu.
Doing so may result in malfunction.
Special Precautions in using the M-100
r
To reduce extraneous noise, place the microphone as far away as possible from
power supply equipment and power supply cables.
r
To avoid adverse effects of transmitted RF radio waves, install the microphone as far
away as possible from the transmitter antenna and antenna cable.