26
01 APO
Set the Automatic Power-Off feature
The transceiver can be set to automatically power OFF when there is no operation for
a period.
OFF
Does not turn the power OFF automatically.
0.5 H / 1.0H / 1.5H /
2.0H to 12 H (hour)
Turns the power OFF when no operation is performed for a
specified time.
02 AR MOD
Selects the Beep option during ARTS operation
Set the operation of the “ARTS function” which informs whether or not communica-
tions are possible with the partner station.
OFF
No beeps. Display only. While within range “IN.RNG” will ap-
pear on the LCD, while out of range “OUT.RNG” will appear.
IN RNG
While within range “IN.RNG” will appear on the LCD every
time a polling transmission is received from the other station,
also the alert beeps will be heard.
While out of range “OUT.RNG” will appear on the LCD. The
beeps are issued only when the radio first confirms that the
stations are out of range, but does not re-confirm with beeps
thereafter.
OUTRNG
While within range “IN.RNG” will appear on the LCD. The
beeps are issued only when the radio first confirms that the
stations are within range, but does not re-confirm with beeps
thereafter.
While out of range “OUT.RNG” will appear on the LCD. A beep
sounds every time the signal of the partner station cannot be
received for 1 minute 20 seconds.
03 AR INT
Selects the Polling Interval during ARTS operation
Sets the transmission interval of the ARTS signal that is automatically transmitted
while the ARTS function is operating.
30 SEC
A confirmation signal is sent approximately every 30 seconds.
1 MIN
A confirmation signal is sent approximately every minute.
04 BCLO
Enables/Disables the Busy Channel Lock-Out feature.
Preventing transmissions when the receive channel is busy.
OFF
Permits starting a transmission while receiving a signal.
ON
Disables transmissions while receiving a signal.
