28
3. Press the
PTT
switch, a beep sounds and a confirmation screen “EMERGENCY
Upload?” Appears. When sending emergency information, press and hold the
PTT
switch, after three beeps, the screen display will change to “EMERGENCY
UPLOADING” for about 5 seconds, and then the countdown will be started. While
pressing the
PTT
switch, speak into MIC.
The maximum recording time is one minute.
4. Release the
PTT
switch after completing audio transmission.
After message transmission completes, “
Completed
” appears and then the screen
returns to the menu list of the local node.
Transmitting routine voice messages to local nodes
1. Follow steps 1 to 3 in “Viewing text data in local nodes” on page 18 to display the
upload (transmission)/download (reception) select screen.
2. Rotate the
FUNC
knob to select [
UPLOAD
], then
press the
FUNC
knob.
Displays the data type select screen.
3. Rotate the
FUNC
knob to select [
VOICE
].
NEWS STATION
UPLOAD
DOWNLOAD
JQ1YBG-ND1 Shinagawa
4. While pressing the
PTT
, speak into MIC.
The maximum recording time is one minute.
5. Release the
PTT
after completing audio transmission.
After message transmission completes, “
Completed
” appears and then the screen
returns to the data type select screen.
Transmitting emergency information to nodes or rooms on the Internet
1. Rotate the
FUNC
knob to select the node or room on the Internet to connect, then
press the
FUNC
knob.
Displays the menu list of the node or room on the Internet.
2. Follow steps 2 to 5 in “Transmitting emergency information to local nodes” on page
Transmitting routine messages to nodes or rooms on the Internet
1. Follow steps 1 to 2 in “Creating and transmitting messages to nodes or rooms on the
Internet” on page 26 to display the upload (transmission)/download (reception) se-
lect screen.
2. Follow steps 2 to 4 in “Transmitting routine voice messages to local nodes” on page
