Yaesu FTM-3207DE, Operating Manual, Page: 22 / 50

22
FTM-3207DR/DE Operating Manual
Advanced Operation
About the Digital Group ID (DG-ID) feature
The DG-ID function can set up two-digit DG-ID numbers from “00” to “99” separately for
Transmit and Receive. By setting both transmit and receive to “00” (default), you can
communicate with all the other stations in the digital C4FM mode.
By matching the transmit DG-ID number to the uplink DG-ID number set in the club DR-
2X/XE System Fusion II digital repeater, you can access the digital repeater DR-2X/XE
used in the club.
For communication only among a group of friend’s transceivers, you can all match the
same DG-ID number; then only your friend’s voices will be heard. Also, by using the GM
function you can check whether stations with the same DG-ID are in the communication
range. The FTM-3207DR/DE may register transmit and receive DG-ID numbers in the
DG-ID memories (up to 10 pairs), and then use the [P1] / [P2] keys on the microphone to
easily recall a Group ID.
Register the DG-ID number in the DG-ID memory
Example: Enter the transmit DG-ID number “50” and the receive DG-ID number “00”
into the DG-ID memory “01”
1. Press and hold the [
P2
] key on the microphone.
The DG-ID memory number at the bottom
right of the screen blinks.
2. Rotate the DIAL knob to select the DG-ID
memory number to be stored to the “01”
register.
3. Press the [ P2 ] key on the microphone.
The transmit DG-ID number “T00” blinks.
4. Rotate the DIAL knob to set the transmit
DG-ID number to “T50”.
5. Press the [ P2 ] key on the microphone.
The transmit DG-ID number blinks.
6. Rotate the DIAL knob to set the receive
DG-ID to “R00”.
7. Press the [
P2
] key on the microphone.
• The input screen of the DG-ID tag is
displayed.