Communicating
Transmitting
While pressing [
PTT
] on the microphone, speak into the mi-
crophone keeping it approximately 5 cm from your mouth.
The upper and lower portions of the indicator light are
red.
Receiving
Release [
PTT
] on the microphone to return to receive
mode.
Scanning
The FTM-3100DR is equipped with a scanning function
to search for memory channels and frequencies with
active signals.
VFO scan
Press
to switch to VFO mode.
Press and hold [
UP
] or [
DWN
] on the microphone for
over one second.
Pressing [
UP
] scans in the higher frequency direction.
Pressing [
DWN
] scans in the lower frequency direction.
Press [
UP
], [
DWN
]
or [
PTT
] on the microphone to cancel
scanning (this does not put the transceiver into transmit
mode).
Memory scan
Frequencies registered to the memory channels can be
scanned in the memory channel number order.
Press
to switch to memory mode.
Press and hold [
UP
] or [
DWN
] on the microphone for
over one second.
Pressing [
UP
] scans the memory channels in an upward
direction.
Pressing [
DWN
] scans the memory channels in a down-
ward direction.
Press [
UP
], [
DWN
]
or
[
PTT
] on the microphone to cancel
scanning (this does not put the transceiver into transmit
mode).
Using the memory channels
Frequently used frequencies can be registered to the
memory channels. You can also assign a name to each
memory channel.
Registering frequencies
Switch to VFO mode, then rotate the DIAL to tune in
to the frequency you want to register to the memory
channel. Press and hold
for over one second, then
rotate the DIAL to select the desired memory channel
and press
.
Assigning a name to the memory channel
Press
to switch to memory mode. Rotate the DIAL
to select the memory channel that is to be assigned a
name. Press and hold
for over one second, then
rotate the DIAL to select “MEM NAME 18”.
Press
, then rotate the DIAL to input the name.
You can move the cursor to the right by pressing
.
Press and hold
for over one second to save the
input name.
