28
Menu Selection Details
FTM-3100R Advance Manual
16 LOCK
Function:
Selects the Control Locking Lockout combination.
Available Values:
KEY+DIAL / PTT / KEY+PTT / DIAL+PTT / ALL / KEY / DIAL
Default:
KEY+DIAL
17 MIC GAIN
Function:
Adjust the microphone gain level.
Available Values:
LEVEL 1 - LEVEL 9
Default:
LEVEL 5
18 MEM NAME
Function:
Programming an Alpha/Numeric label for a Memory Channel.
See page 15 for details.
19 MW MODE
Function:
Selects the method of selecting of channels for Memory Storage.
Available Values:
NEXT CH / LOWER CH
Default:
NEXT CH
NEXT CH: Stores the data into the memory channel which is next-highest from the
last-stored
memory channel.
LOWER CH: Stores the data into the lowest-available “free” channel.
20 OPEN MSG
Function:
Selects the Opening Message that appears when the radio is powered ON.
Available Values:
DC / MESSAGE / OFF
Default:
MESSAGE
DC:
DC supply voltage
MESSAGE: Set by user. See below.
OFF:
No Opening Message
Here’s how to program the Opening Message:
1. Set this Set Mode Item to “MESSAGE”.
2. Press the [
TXPO
] key momentarily to enable programming of the opening message.
You will notice the first character entry’s location blinking.
3. Rotate the
DIAL
knob to select the first letter/number of the message, and then press
the [
V/M
(
MW
)] key momentarily to move to the next character.
4. Repeat the previous step as necessary to complete the message (up to 8 characters).
5. To correct a mistake, press the [
SQL
] key to backspace the cursor; now re-enter the
correct letter/number.
6. When the desired opening message is completed, press the [
TXPO
]
key momentarily
to confirm the message, then press and hold in the [
MHz
(
SETUP
)] key for one second
to save the settings and exit to normal operation.
