49
y
90 CALLSIGN (APRS)
Specify the CALLSIGN of your station.
Explanation:
Register the CALLSIGN of your station which is needed for APRS communication.
APRS data cannot be transmitted if a CALLSIGN for your station is not registered.
Be sure to register a CALLSIGN.
When a CALLSIGN is registered to your station, it is displayed on the LCD when the
power of this transceiver is turned on.
Register a CALLSIGN as shown below.
–
NN
: CALLSIGN (Up to 6 characters)
NN: Number (a number between 1 to 15, or no SSID.)
Entering [-9] after the CALLSIGN is recommended in standard mobile use.
y
91 MESSAGE GROUP
Group filter setting for APRS MSG GROUP received messages.
Setting Items:
A filter can be set for receiving messages with a specified group code
(ALL or CQ).
GROUP 1
GROUP 2
GROUP 3
GROUP 4
GROUP 5
GROUP 6
BULLETIN 1
BULLETIN 2
BULLETIN 3
Default:
GROUP 1: ALL
GROUP 2: CQ
GROUP 3: QST
GROUP 4: YAESU
GROUP 5: –––––––––
GROUP 6: –––––––––
BULLETIN 1: BLN?
BULLETIN 2: BLN?
BULLETIN 3: BLN?
Explanation:
A filter can be set to receive messages with a specified group code (ALL
or CQ)
(ALL, CQ, QST, and YAESU are selected in default settings).
“
”: Acts as a wild card matching any character received.
