General
Frequency Range: RX: 0.5 - 1.8 MHz (AM BC)
76 - 108 MHz (FM BC)
108-137 MHz (Air Band)
137-174 MHz (144 MHz HAM)
174-222 MHz (GR1 VHF TV)
300-420 MHz (GR2 )
420-470 MHz (430 MHz HAM)
470-800 MHz (GR1 UHF TV)
800-999 MHz (GR2 USA Cellular Blocked)
TX: 2 m /70 cm Amateur Bands
Channel Steps: 5/6.25/8.33/(9)/10/12.5/15/20/25/50/100/200 kHz (9): AM Only
Emission Type: F3E, F2D
Antenna Impedance: 50 Ohms
Frequency Stability:
±
5 ppm @ 14
°
F ~ +140
°
F (
–
10
°
C ~ +60
°
C)
Operating Temperature Range:
–
4
°
F ~ +140
°
F (
–
20
°
C ~ +60
°
C)
Supply Voltage: Nominal: 13.8 V DC, Negative Ground
Operating: 11.7 ~ 15.8 V, Negative Ground
Current Consumption: RX: 0.5 A (Receive)
(Approx.) 8.3 A / 6 A / 2A (TX, 2 m 50W / 20 W / 5 W)
8.5 A / 6 A / 2A (TX, 70 cm 40W / 20 W / 5 W)
Case Size (W x H x D): 4.4" x 1.5" x 7" (112 x 37.6 x 178 mm)
(w/o knobs & connectors)
Weight (Approx.): 2.9 lb. (1.3 kg)
Transmitter
RF Power Output: 50/20/5 W (2 m)
40/20/5 W (70 cm)
Modulation Type: Variable Reactance
Maximum Deviation:
±
5 kHz
Spurious Radiation: At least
–
60 dB below
Microphone Impedance: 2 k
Ω
Receiver
Circuit Type: FM / AM: Double-Conversion Super heterodyne
WFM: Triple-Conversion Super heterodyne
AM / FM Radio: Single-Conversion Super heterodyne
Intermediate Frequencies: FM / AM: 1st: 47.25 MHz, 2nd: 450 kHz
WFM: 1st: 45.8 MHz, 2nd: 10.7MHz, 3rd: 1MHz
FM Radio: 130 kHz, AM Radio: 50 kHz
Sensitivity: 5
µ
V TYP for 10 dB SN (0.5-1.7 MHz, AM)
2
µ
V TYP for 12 dB SINAD (76-108 MHz, WFM)
0.8
µ
V TYP for 10 dB SN (108-137 MHz, AM)
0.2
µ
V for 12 dB SINAD (137-140 MHz, FM)
0.2
µ
V for 12 dB SINAD (140-150 MHz, FM)
0.25
µ
V for 12 dB SINAD (150-174 MHz, FM)
1
µ
V TYP for 12 dB SINAD (174-222 MHz, WFM)
0.8
µ
V TYP for 10 dB SN (300-336 MHz, AM)
0.25
µ
V TYP for 12 dB SINAD (336-420 MHz, FM)
0.2
µ
V for 12 dB SINAD (420-470 MHz, FM)
5
µ
V TYP for 12 dB SINAD (470-540 MHz, WFM)
5
µ
V TYP for 12 dB SINAD (540-800 MHz, WFM)
0.4
µ
V TYP for 12 dB SINAD (800-899.99 MHz, FM)
0.8
µ
V TYP for 12 dB SINAD (900 - 999.99 MHz, FM)
*USA Version Cellular Blocked
Squelch Sensitivity: Better than 0.16
µ
V (Amateur Band)
Selectivity : NFM, AM 12 kHz / 30 kHz (
–
6 dB /
–
60 dB)
AF Output: 8 W @ 4 Ohm for 10 % THD (@ 13.8 V) BTL EXP SP
4 W @ 4 Ohm for 10 % THD (@ 13.8 V) Normal EXP SP/CH
AF Output Impedance: 4-16
Ω
Specifications
Options
BH-1
Waterproof (equivalent
to the IP55 Standard)
Bluetooth
®
headset
BH-1
Waterproof (equivalent
to the IP55 Standard)
Bluetooth
®
headset
BH-1
Waterproof (equivalent
to the IP55 Standard)
Bluetooth
®
headset x 2
MMB-M11
Multi-angle Mounting Bracket
CT-M10
20ft /6 m Front Panel Separation Cable
MH-68
A6J
Waterproof DTMF
Hand Microphone
MH-68
B6J
Waterproof Hand
Microphone
MH-68
A6J
Waterproof DTMF
Hand Microphone
MH-68
B6J
Waterproof Hand
Microphone
BU-1
Bluetooth
®
Adapter unit
BU-1
Bluetooth
®
Adapter unit
BU-1
Bluetooth
®
adapter unit
for the front control panel and
the main body
CAB-1
Headset charger sleeve for
BH-1 Bluetooth
®
headset
CAB-1
Headset charger sleeve for
BH-1 Bluetooth
®
headset
MEK-M10
Microphone Jack
for the front control
panel
MMB-M10
Multi-angle Stand Bracket
MLS-200-M10
Waterproof (Equivalent to
the IP55 Standard)
external speaker (8 W)
MLS-200-M10 X 2
Waterproof (Equivalent to the IP55
Standard) external speaker (4 W x2)
Operation Customizing Options
Operation Customizing Options
Audio Amplifier/PA Function
Hands Free Operation
Intercom Function
External Microphone
Mount the FTM-10R/E Front Control Panel
on a Motorcycle Handlebar
Mount the FTM-10R/E Front Control Panel
inside your Motor Vehicle
Separation Kit (more than 10 ft)
Supplied Accessories
MIC
EXT SP Jack
MLS-200-M10
MEK-M10 Microphone Jack for
the front control panel
MIC Jack
CAB-1 Headset charger sleeve
CAB-1
Headset charger sleeve
BH-1
Bluetooth
®
headset
BH-1
Bluetooth
®
headset
BH-1
Bluetooth
®
headset
BH-1
Bluetooth
®
headset
BH-1
BU-1
BU-1 Bluetooth
®
Adapter unit
BU-1 Bluetooth
®
Adapter unit
BU-1 Bluetooth
®
Adapter unit
BU-1 Bluetooth
®
Adapter unit
Stereo output cable
(Supplied)
Using Bluetooth¤ headset
iPod
®
etc.
iPod
®
etc.
FEP-4
FEP-4
Ear Phone for BH-1
Hanger bracket
•
With Hanger brackett
•
Direct mounting
External Audio Input (CD player, iPod
®
, etc.)
External Stereo Audio Output
L
R
MLS-200-M10 x 2
(NB : 10 ft /3 m Front Panel Separation Cable is
included as a supplied accessory.)
PTT
PTT
PTT
PTT
PTT
PTT
LINE IN
LINE IN
LINE IN
LINE IN
Mobile Mounting
Bracket
Angle Adapter
Spare Fuse
DC Power Cord W/Fuse
Separation Cable (10 ft/3 m)
Separation Cable (10 ft/3 m)
Magnet
Speaker Cable
Front Panel Bracket
Hex Wrench
(4 mm,3 mm)
R
L
2007.0510NA(U/E)
Printed in Japan
B9200563
VERTEX STANDARD CO., LTD.
For the latest Yaesu news,visit us on the Internet:
4-8-8 Nakameguro, Meguro-ku, Tokyo 153-8644, Japan
VERTEX STANDARD
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
YAESU EUROPE B.V.
P.O. Box 75525, 1118 ZN Schiphol, The Netherlands
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
VERTEX STANDARD HK LTD.
Unit 5, 20 /F., Seaview Centre, 139-141 Hoi Bun Road,
Kwun Tong, Kowloon, Hong Kong
http://www.vxstd.com
http://www.vertexstandard.com
Email: [email protected]
http://www.yaesu.co.uk
Email: [email protected]
Phone +1 714-827-7600
http://www.vxstd.com.hk
VERTEX STANDARD AUSTRALIA PTY. LTD.
Normanby Business Park, Unit 14/45 Normanby Road
Notting Hill 3168, Victoria, Australia
Phone +31 20-5005270
Phone +44 196 286 6667
Phone +852 2732 2288
Phone +61 3 95182100
About this brochure: we have made this brochure as comprehensive and factual as possible. We reserve the right, however, to make changes at any time to equipment, optional accessories, specifications,
model numbers, and availability. Precise frequency range may be different in some countries. Some accessories shown herein may not be available in some countries. Some information may have been
updated since the time of printing; please check with your Authorized Yaesu Dealer for complete details.
* Monoral audio output
or
or
or
or
or
MEK-M10
Microphone Jack
(for Front Panel)
•
DC Power Supply FP-1030A (25 A) / FP-1023A (25 A
/ USA Version
)
MEK-M10
PTT
PTT
1
Using Bluetooth¤ headset
Using after-market headset
Using after-market headset
(After-market headset)
After-market headset
After-market headset
After-market
headset
2
2
1
1
2
CT-M11
External Headset
Connection Cable
CT-M11
External Headset
Connection Cable
(After-market
headset)
CT-M11
CT-M11
CT-M11
Bracket(L)
Bracket(S)
