Yaesu FTM-100DE, Instruction Manual

Page: 11 / 15

11
Sending MESSAGE (Massages) or Images (PICT)
3
Rotate the DIAL to select the desired routine
message, then press .
Displays the selected routine message in the
message entry field.
4
Press ( appears on the upper side).
Hides the routine message display field at the top of
the screen.
5
To add letters to the message, input letters following steps 4 to 5 in “Creating and
sending a new message” on page 9.
●
Registering routine messages
You can register up 10 routine messages using a maximum of 80 characters.
Messages you registered can be selected and used in the same way as the 19 prepared
routine messages.
1
Follow steps 1 to 6 in “Creating and sending a new message” on page 9 to input a
text message.
Tip Alphanumeric characters including symbols can be used.
2
Press .
3
Press ( appears on the upper side).
Displays the routine message field at the top of the
screen.
4
Rotate the DIAL to select the number where you
want to register the message, then press .
Tip You can select a number from “01” to “10”.
Registers the text as a routine message and closes the routine message field.
Tips • If you register a new message to a number where a message already have registered, the
old message is overwritten.
• To cancel registration, press again ( appears on the upper side).