The software versions can be displayed on the radio
While holding the three buttons [GEN]
＋
[50]
＋
[ENT] turn the radio on. The software version will be
displayed in the VFO-A window for 5 seconds then the radio will start up in normal operation.
See below:
Example EDSP V11.53 and MAIN V 0518 software version.
*If you already have
EDSP
V11.54
and MAIN
V0521
software versions,
it is not necessary to update the
FT
DX
9000 again.
The latest versions are listed below with the release dates.
・
MAIN Software Version
0521
(8/26/10)
・
EDSP Software Version
11.54
(4/23/10)
Ver. 0521 MAIN implements improvements (also includes all previous updates):
•
In Split different mode operation between VFO-A and VFO-B, the DMU display is corrected to show
operation.
•
Stabilize initial power on display.
Ver. 11.54 EDSP implements improvements (also includes all previous updates):
•
Corrected FM TX for a slight frequency offset.
*When menu settings are saved on the DMU-9000 CF card and transferred to the new version, some previous versions
may not transfer correctly. Please check your menu, update the settings, and then save the new settings to the CF card.
Install the data file to PC
*Before you install this software make sure that you delete all of the old update files AH010 and FWS002
that are saved on your computer. Do not keep any of the old files or folders on your computer. (The old
files are not compatible with the PEP9000 updated radio).
1.
Down load the FT
DX
9000 data file [
FTdx9000_PEP9000_8-26-10.zip
] from the following
website:
http://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=102&encProdID=34B0B268
F77981D7E72CF66FC1930880&DivisionID=65&isArchived=0
2.
Save the FT
DX
9000 data file [
FTdx9000_PEP9000_8-26-10.zip
] to the desktop on your
computer.
3.
Unzip and Extract the contents of [
FTdx9000_PEP9000_8-26-10.zip
] to the desktop of your
computer.
4.
You will find the
PEP9000_EDSP
and
PEP9000_MAIN
folders on your desktop.
The programmer and software are now stored on your computer on the desktop. The files designated
in the last step above are ready to update your FT
DX
9000 Transceiver.
EDSP:
Software version
11.XX
(This image & version is for
illustration only)
Main CPU:
Software version
05XX
(This image & version is
for illustration only)
