Page 113
FT
DX
9000D O
PERATION
M
ANUAL
The Quick Memory Bank is comprised of five memories (labeled C1 ~ C5) independent from the regular and PMS memo-
ries. These can quickly store operating parameters for later recall.
QMB C
HANNEL
S
TORAGE
1.
Tune to the desired frequency on the Main (VFO-A)
band.
2.
Press the blue (QMB) STO key (#
). The “beep”
will confirm that the contents of the Main (VFO-A)
band have been written to the currently-available QMB
memory.
If you repeatedly press the (QMB) STO key, the QMB
memories will be written in the following order:
C-2
C-3
C-4
C-5
C-1
Once all five QMB memories have data on them, previous
data (starting with channel C1) will be over-written on a
first-in, first-out basis.
QMB C
HANNEL
R
ECALL
1.
Press the (QMB) RCL key (#
). The display will
indicate “QMB” and the current QMB channel's data
will be shown on the main frequency display field.
2.
Repeatedly pressing the (QMB) RCL key will toggle
you through the QMB channels:
C-2
C-3
C-4
C-5
C-1
Advice
You may change the QMB channel’s frequency by rotat-
ing the Main Tuning Dial (#
) (Memory Tune Opera-
tion, described details on page 117).
H
“
” will replace “
” in the multi-panel window, indicat-
ing you are in the “Memory Tune” mode.
H
During Memory Tune operation, you may change operating modes,
and engage and offset the Clarifier, if desired.
Press the V/M switch momentarily to return to the originally-
memorized frequency of the current memory channel. One more
press of the V/M key will return you to VFO operation.
QMB
(Q
UICK
M
EMORY
B
ANK
)
QMB STO key
QMB RCL key
Summary of Contents for FTDX-9000D
