FTA-250L O
perATing
M
AnuAL
4
Important Notice!
FCC RF Exposure Compliance Requirements for
Occupational Use Only:
The
FTA-250L
has been tested and complies with the
Federal Communications Commission (FCC) RF expo-
sure limits for Occupational Use/Controlled Exposure
Environment. In addition, the radio complies with the fol-
lowing Standards and Guidelines:
FCC 96-326, Guidelines for Evaluating the Environ-
mental Effects of Radio-Frequency Radiation.
FCC OET Bulletin 65 Edition 97-01 (1997) Supple-
ment C, Evaluating Compliance with FCC Guidelines
for Human Exposure to Radio Frequency Electro-
magnetic Fields.
ANSI/IEEE C95.1-1992, IEEE Standard for Safety
Levels with Respect to Human Exposure to Radio
Frequency Electromagnetic Fields, 3 kHz to 300
GHz.
ANSI/IEEE C95.3-1992, IEEE Recommended Prac-
tice for the Measurement of Potentially Hazardous
Electromagnetic Fields - RF and Microwave.
This radio is NOT approved for use by the gen-
eral population in an uncontrolled environment.
This radio is restricted to occupational use, work
related operations only where the radio operator
must have the knowledge to control its RF expo-
sure conditions.
When transmitting, hold the radio in a vertical po-
sition with its microphone 1 to 2 inches (2.5 to 5
cm) away from your mouth and keep the antenna
at least 1 inch (2.5 cm) away from your head and
body.
The radio must be used with a maximum oper-
ating duty cycle not exceeding 50%, in typical
Push-to-Talk configurations. DO NOT transmit for
more than 50% of total radio use time (50% duty
cycle). Transmitting more than 50% of the time
can cause FCC RF exposure compliance require-
ments to be exceeded.
Always use YAESU authorized accessories.
NOTICE
There are no user-serviceable parts inside this
transceiver.
All service work must be referred to an Authorized
Service Center.
Summary of Contents for FTA-250L
Page 1: ...Operating Manual AIR BAND TRANSCEIVER FTA 250L F...
Page 35: ......
