Yaesu FT-991, Operating Manual

Page: 82 / 96

Page 80 FT-991 O
peraTing
M
anual
M
eMorY
o
peraTion
M
eMory
g
roupS
Memory channels may be arranged into as many as six convenient groups, for easy identification and selection. For ex -
ample, you might want to designate memory groups for AM BC stations, short-wave broadcast stations, contest frequen-
cies, repeater frequencies and PMS limits, or any other groupings you like.
Each memory group is capable of holding up to 20 memory channels (except Memory Group 01: it is 19 memory chan-
nels, and the Group size is fixed). When a memory channel is grouped, the channel numbers change to correspond to the
chart below:
Memory Group Assignment
1. Press the MENU(SETUP) button to enter the Menu
mode.
2. Rotate the MULTI knob to select Menu item “
033
MEM GROUP
”.
3. Touch [
SELECT
] on the LCD, then rotate the
MULTI knob to set this Menu item to “
ENABLE
” (the
default setting is “
DISABLE
”).
4. Touch [
ENTER
] on the LCD to save the new set-
ting.
5. Press the MENU(SETUP) button or [ BACK
] on the
LCD to exit. Operation will now be restricted to the
six Memory Groups.
To cancel Memory Group operation, repeat steps (1)
through (4) above, choosing “
DISABLE
” in step (3).
A
dvice
:
To avoid confusion, note that the PMS memory group
and the PMS memories “P-1L” through “P-9U” will be
so designated.
g
roup
M
eMory
“oFF ”
01 ~ 19
20 ~ 39
40 ~ 59
60 ~ 79
80 ~ 99
P-1L/1U ~ P-9L/9U
5M-01 ~ 5M-10
M
eMory
c
hAnnel
n
uMber
g
roup
M
eMory
“on ”
1-01 ~ 1-19
2-01 ~ 2-20
3-01 ~ 3-20
4-01 ~ 4-20
5-01 ~ 5-20
P-1L/1U ~ P-9L/9U
US-1 ~ US-5
Choosing the Desired Memory Group
You may recall memories just within a particular Memory Group, if desired.
1. Press the
V/M
button, if necessary, to enter the
“Memory” mode.
2. Press the F(M-LIST) button, then touch [ GRP
] on
the LCD. The “ GRP ” icon will appear on the dis-
play.
3. Rotate the MULTI knob to select the desired Memo-
ry Group.
4. Press the F(M-LIST) button, then touch [ MCH
] on
the LCD. The “ MCH ” icon will appear on the dis-
play.
5. Rotate the MULTI knob to select the desired Memo-
ry Channel within the Selected Memory Group.
A
dvice
:
If no channels have been assigned to a particular Memo-
ry Group, you will not have access to that Group.
MENU(SETUP) Button
MULTI Knob
F(M-LIST) Button
V/M Button MULTI Knob