Yaesu FT-950, Technical Supplement

Page: 2 / 154

Specifications-2 FT-950 Technical Supplement
General
Rx Frequency Range: 30 kHz - 56 MHz (operating)
160 - 6 m
(specified performance, Amateur bands only)
Tx Frequency Ranges: 160 - 6 m (Amateur bands only)
Frequency Stability: ±0.5 ppm (after 1 minute @+77 °F [+25 °C])
±1.0 ppm (after 1 minute @+14 °F ~ +122 °F [-10 °C ~ +50 °C])
Operating Temperature Range: 14 °F ~ +122 °F (-10 °C ~ +50 °C)
Emission Modes: A1A (CW), A3E (AM), J3E (LSB, USB), F3E (FM),
F1B (RTTY), F1D (PACKET), F2D (PACKET)
Frequency Steps: 1/10 Hz (SSB, CW, & AM), 100 Hz (FM)
Antenna Impedance: 50 Ohms, unbalanced
16.7 - 150 Ohms, unbalanced
(Tuner ON, 160 - 6 m Amateur bands, TX only)
Power Consumption (Approx.): Rx (no signal) 1.8 A
Rx (signal present) 2.1 A
Tx (100 W) 22 A
Supply Voltage: DC 13.8 V ± 10% (Negative Ground)
Dimensions (WxHxD): 14.4" x 4.5" x 12.4" (365 x 115 x 315 mm)
Weight (Approx.): 21.6 lbs (9.8 kg)
Transmitter
Power Output: 5 - 100 watts (2 - 25 watts AM carrier)
Modulation Types: J3E (SSB): Balanced,
A3E (AM): Low-Level (Early Stage),
F3E (FM): Variable Reactance
Maximum FM Deviation: ±5.0 kHz/±2.5 kHz
Harmonic Radiation: Better than -60 dB (160 - 10m Amateur bands: Harmonics)
Better than -50 dB (160 - 10m Amateur bands: Others)
Better than -65 dB (6m Amateur band)
SSB Carrier Suppression: At least 60 dB below peak output
Undesired Sideband Suppression: At least 60 dB below peak output
3rd-order IMD: -31 dB @14 MHz 100 watts PEP
Bandwidth: 3 kHz (LSB/USB), 500 Hz (CW), 6 kHz (AM), 16 kHz (FM)
Audio Response (SSB): Not more than -6 dB from 300 to 2700 Hz
Microphone Impedance: 600 Ohms (200 to 10 kOhms)
Specifications