The FT-950 incorporates a highly efficient and reliable RD100HHF1
MOS FET, in a push-pull configuration, using a supply voltage of 13.8
V and cooled by a huge 1400 cc die-cast aluminum heat sink with a
high coefficient of thermal conductivity. A thermostatically-controlled
2.35"/60 mm axial cooling fan engages at 40 deg C/104 deg F, and it
features four speeds, depending on the degree of cooling required.
The large bearing surface of the fan, its floating mount, and the unique
heat sink design combine to make the cooling system incredibly calm
and quiet, yet very efficient.
Within each of the three audio bands (low-frequency, mid-range, and
high-frequency) provided, you may adjust the center frequency of the
equalization, the bandwidth over which the equalization is applied, and
the amplitude (either peaking or nulling) within that range. Enjoy high
quality transmit audio that you set to your specific preference!
The IF Transmission Monitor allows you to listen to an accurate
reproduction of the transmitter's IF signal, for making precise adjustments
to the Parametric Equalizer, SSB Bandwidth, and/or Speech Processor.
The Monitor Level may be adjusted from the front panel.
!
" #$
The power of IF DSP is brought to the world of Speech Processing,
with the powerful new DSP Speech Processor design incorporated into
the FT-950. The built-in Speech Processor is designed to tailor the
optimum frequency response and increase intelligibility at the receiving
side of a difficult path. The compression level for the Speech processor
can be adjusted from the menu to obtain the best performance during
DX pile-up operation or when propagation conditions vary.
6
Super-Clean Transmitter Design
%
The 100 memories of matching-point data make it possible for you to
tune around the bands without the need to re-tune as you go. The special
antenna tuner memories
ensure efficient operation,
as well as lightning-fast
matching at new operating
frequencies, as needed.
&
Summary of Contents for FT-950
Page 1: ...FT 950...
