![background image](http://html2.mh-extra.com/html/yaesu/ft-8800r/ft-8800r_technical-supplement_3141115015.webp)
15
49. Press the “Left” band [
V/M
] key.
50. Tune the “Left” band frequency to 850.05 MHz.
51. Inject an 850.05 MHz signal at a level of +3 dBµ from
the RF Signal Generator.
52. Press the “Left” band [
LOW
] key.
53. Increase the RF Signal Generator output level to +31
dBµ.
54. Press the “Left” band [
V/M
] key.
Alignment
DC Voltmeter
1. Set the power supply voltage to 13.8 VDC.
2. Press and hold in the in the “Sub” band
DIAL
knob to
set the Alignment parameter to “
b-8 BAT SC
.”
3. Press the “Left” band [
SCN
] key.
To close the Alignment mode, just press and hold in the
“Right”
VOL
knob for 2 seconds (to turn the power off).
The next time the transceiver is turned on, normal opera-
tion may resume.
Summary of Contents for FT-8800R
