110
FT-857 Operating Manual
MENU MODE No-076
[
RPT SHIFT
]
Function
: Sets the magnitude of the repeater shift.
Available Values
: 0.00 ~ 99.99 (MHz)
Default
: Depends on operating band and transceiver version.
MENU MODE No•077
[
SCAN MODE
]
Function
: Selects the desired Scan-Resume mode.
Available Values
: TIME/BUSY/STOP
Default
: TIME
This Menu Item allows you to select your favorite method of scan-restart after the scanner
has stopped on an incoming signal (when the squelch opens).
TIME: The scanner will hold for a fixed length of time, set via MENU MODE
No-078
[
SCAN RESUME
]
, then resume whether or not the other station is still transmitting.
BUSY: The scanner will hold until the signal disappears, then will resume after one second.
STOP: The scanner will stop when a signal is received, and will not restart.
MENU MODE No•078
[
SCAN RESUME
]
Function
: Sets the delay time for scanning resumption.
Available Values
: 1 ~ 10 (sec)
Default
: 5
MENU MODE No•079
[
SPLIT TONE
]
Function
: Enables/disables split CTCSS/DCS coding.
Available Values
: OFF/ON
Default
: OFF
MENU MODE No-080
[
SQL/RF GAIN
]
Function
: Selects the configuration of the front panel’s
SQL/RF
knob.
Available Values
: RF-GAIN/SQL
Default
: Depends on transceiver version.
MENU MODE No-081
[
SSB MIC GAIN
]
Function
: Adjusts the microphone gain level for the SSB mode.
Available Values
: 0 ~ 100
Default
: 50
MENU MODE No-082
[
SSB STEP
]
Function
: Selects the tuning steps for the
SELECT
knob on the SSB mode.
Available Values
: 1 kHz/2.5 kHz/5 kHz
Default
: 2.5 kHz
M
ENU
O
PERATION
