d.
rotate dial to menu #28 “NM WRT”
d.
press F/W key until you see the small word “see” in then upper left of
the display
e.
rotate dial to select first digit…there are capitals, prosigns, and
letters….just keep dialing. After placing the digit, press the F/W key
f.
if you make a mistake, just press the “Down MHZ” key and place
will move back one space.
g.
You do NOT need to fill all six digit placements. Press the F/W once,
then again and the word “see” will disappear and that label/freq
stored on a memory channel.
h.
when finished repeat all steps from step b.
NEXT CHEAT SHEET ADDITIONDS COMING SOON: How to auto conserve
TX/RX power while rig remain on and in sleep mode and will awaken if signal
present. Also turning off display light to only turn on when selecting freq. or
transmitting. BIG power saver.
Frank NG1I
“Never Give 1 Inch”
