Page 22
FT-410 O
peraTiOn
M
anual
The powerful CW operating capabilities of the
FT-410
include operation using both an electronic keyer
paddle and a “straight key” or emulation thereof, as is provided by a computer-based keying device.
S
etup
for
S
trAiGht
K
ey
(
ANd
S
trAiGht
K
ey
emulAtioN
)
o
perAtioN
Before starting, connect your key to the front panel
KEY
jack in the status that turned off the [
Power
/ LOCK
]
switch, and be sure the [
KEYER
] button is turned off for now.
1. Press the [
]/[
] buttons to select the operating
band.
By pressing the [
]/[
] buttons, the operating band
will change as follows.
7
10
14
15
18
21
24.5
28
1.8
3.5
7 ......
2. Press the [
MODE
] buttons to select the CW mode.
3. Rotate the [
MAIN DIAL
] knob to adjust the
operating frequency.
If you use the
MH-31
B8
, you may adjust the
operating frequency by the [
UP
]/[
DWN
] buttons on
the microphone.
4. Press the [
VOX]
button to engage automatic
activation of the transmitter when you close the CW
key. The “BK” icon will appear in the display.
5. When you close your CW key, the transmitter will
automatically be activated, and the CW carrier
will be transmitted. When your release the key,
transmission will cease after a brief delay.
n
OTe
:
Do not use the plug except the 3.5-mm 3-pin type plug. If the plug in correct size is not used the radio
may be harmed or damaged.
14.195.000
M-012
[MAIN DIAL]
knob
[MODE]
button
[
▼
]/[
▲
] button
[KEYER]
button
[MENU]
button
[VOX]
button
cW M
Ode
O
peraTiOn
