Yaesu FT-2980E, Operating Manual

Page: 46 / 80

Priority Channel Scanning (Dual Watch)
The
FT-2980R/E
’s scanning features include a two-channel scanning capability which
allows you to operate on a VFO, Memory channel, or Home channel, while periodically
checking a user-defined Memory Channel for activity. If a station is received on the
Memory Channel which is strong enough to open the Squelch, the scanner will pause on
that station in accordance with the Scan-Resume mode set via Menu item “
41 RESUME
”.
See page 39.
Here is the procedure for activating Priority Channel Dual Watch operation:
1. Set the radio to the Memory Recall mode by pressing the [
D/MR
(
MW
)] key repeated-
ly, if necessary.
2. Press and hold in the [
D/MR
(
MW
)] key for one second (the Memory Channel number
will blink), then select the memory channel you wish to be the “Priority” channel.
3. Press the [ ] key momentarily. The “ PRI ” icon will appear to the upper right corner
on the display; indicating it is the Priority channel.
4. Now set the
FT-2980R/E
for operation on another memory channel, Home channel,
or on a VFO frequency.
5. Press and hold in the [
REV
(
DW
)] key for one second. The display will remain on the
VFO, the selected memory channel, or the Home channel, but every five seconds
the
FT-2980R/E
will check the Priority Channel for activity.
6. To cancel Dual Watch operation, press the [ D/MR
(
MW
)] key momentarily.
Priority Revert Mode
During Priority channel operation (Dual Watch), a special feature is available which will
allow you to move to the Priority Channel instantly, without waiting for activity to appear
on the Priority Channel.
When this feature is enabled, and priority monitoring is engaged, just press the
microphone’s PTT switch. Operation will instantly revert to the Priority Channel.
To enable Priority Revert operation:
1. Press and hold the [ MHz
(
SET
)] key for one second,
then rotate the DIAL knob to select “
44 RVRT
”.
2. Press the [ MHz
(
SET
)] key, then rotate the
DIAL knob to
select “
ON
”.
3. Press and hold the [ MHz
(
SET
)] key for one second to
save the new setting and exit to normal operation.
To disable Priority Revert operation, select “
OFF
” in step 2
above.
42
Scanning
FT-2980R/E Operating Manual