FT-270R O
PERATING
M
ANUAL
78
Set Mode Item 39
[
SCN MD
]
Function
: Selects the Memory Scan channel-selection mode.
Available Values
: ONLY/MEM
Default
: MEM
ONLY: The scanner will only scan channels that are flagged (Preferential Scan List).
MEM: The scanner will “skip” the flagged channels during scanning.
Set Mode Item 40
[
SCN.LMP
]
Function
: Enables/Disables the Scan lamp while paused.
Available Values
: ON/OFF
Default
: ON
Set Mode Item 41
[
SHIFT
]
Function
: Sets the magnitude of the repeater Shift.
Available Values
: 0.00 - 99.95 MHz (50 kHz increments)
Default
: Depends on the operating band and transceiver version.
Set Mode Item 42
[
SKIP
]
Function
: Selects the Memory Scan “Skip” channel-selection mode.
Available Values
: OFF/SKIP/ONLY
Default
: OFF
SKIP:
The scanner will “skip” the flagged channels during scanning.
ONLY: The scanner will only scan channels that are flagged (Preferential Scan List).
OFF:
All memory channels will be scanned (the “flag” will be ignored).
Set Mode Item 43
[
SPLIT
]
Function
: Enables/Disables split CTCSS/DCS coding.
Available Values
: SPL.OFF/SPL. ON
Default
: SPL.OFF
When this Set Mode Item is set to “SPL. ON,” you will see the following additional param-
eters after the “DCS” parameter while configuring Set Mode Item 44:
SQL.TYP
.
D:
DCS Encode only.
T DCS: Encodes a CTCSS tone and Decodes a DCS code.
D TSQL: Encodes a DCS code and Decodes a CTCSS tone.
Select the desired operating mode from the selections shown above.
S
ET
(
M
ENU
)
M
ODE
