Yaesu FT-25R, Advance Manual

Page: 37 / 39

37
Set (Menu) Mode
FT-25R/FT-25E Advance Manual
Item
(lower menu
item)
Function Values Default Value
12 DTMF SET Selects the MANUAL or AUTO
DTMF tones.
Setting the DTMF autodialer
sending delay time and Speed. MODE= MANUAL / AUTO
DELAY= 50mS / 250mS /
450mS / 750mS /
1000mS
SPEED= 50mS / 100mS
M=MANUAL
D=450mS
S=50mS
28
13 DTMF WRT Programing to DTMF autodialer.
− −
28
14 EDG.BEEP Enables/disables the Band-
edge beeper while selecting the
frequency via the
[▲] or [▼] key
.
BEEP OFF / BEEP ON BEEP OFF
−
15 KEY LOCK Keyboard Lock function. KEY / PTT / P+K KEY
−
16 LAMP Selects the LCD/Keypad Lamp
mode. 5secKEY / 10secKEY /
30secKEY / CONT / OFF 5secKEY
−
17 LED Selects the enable or disable TX/
BUSY LED function. TX= ON / OFF
BUSY= ON/ OFF TX=ON
BUSY=ON
31
18 MEM DEL
(MEM DELETE) Deletes Memory Channel.
− − −
19 MON/T-CL
(MON/T-CALL) Selects the MONI or T.CALL switch
function.
MONI : Pressing the MONI key
causes the Noise/Tone
Squelch to be over-ridden,
allowing weak (or non-
encoded) signals to be
heard.
T-CALL : Pressing the MONI key
activates a 1750-Hz burst
tone, used for repeater
access in many countries
(especially in Europe).
MONITOR / T-CALL1750 /
T-CALL2100 / T-CALL1000 /
T-CALL1450 MONITOR ( * ) or
T-CALL1750 ( * )
−
20 NAME TAG Renames Alpha-Numeric “Tags” for
the Memory channels.
− − −
21 PAGER Setting the TX CTCSS of 2 tone
and the RX CTCSS of 2 tone.
Enables/disables the Answer Back
function. TX: ** **
RX: ** **
ACK : ON / OFF TX=05 47
RX=05 47
ACK=OFF
12
22 PASSWORD Enables/disables the Password
feature OFF / ON OFF
30
23 PRI.RVT Enables/disables the Priority Revert
feature. RVT.OFF / RVT. ON RVT.OFF
22
24 REPEATER ARS / MODE / SHIFT function
setting. ARS= ON / OFF
MODE=SIMPLEX / +REP /
-REP
SHIFT= 0.05 MHz - 99.95
MHz/0.025 MHz - 99.975
MHz*(per **KHz*) ARS=ON
MODE=SIMPLEX
SHIFT=**.***M (
* )
−
25 RESUME Selects the Scan Resume mode. BUSY / HOLD / TIME BUSY 21
26 RF SQL Adjusts the RF Squelch threshold
level. S-1 / S-2 / S-3 / S-4 / S-5 /
S-6 / S-8 / S-FULL / OFF OFF
5
27 SCN.LAMP Enables/Disables the Scan lamp
while paused. ON / OFF ON
23
28 SKIP
(SKIP SCAN) Selects the Memory Scan “Skip”
channel-selection mode.
− −
18