![background image](http://html1.mh-extra.com/html/yaesu/fl-110/fl-110_instruction-manual_892654007.webp)
The FL- llO can be keyed either manually or automatically.
For manual operation, use the accessory relay output of the
transceiver in use as illustrated in Fig. 1. With this interconnection,
the FL- llO is keyed by push-to-talk operation of the transceiver.
Carefully examine the relay function of the transceiver.
The switch marked PTT on the rear panel should be set to ( -) for
the transceiver which has the accessory relay contact close to ground
in transmit (FT-101 series) . It should be set to ( +) position for the
transceiver which has the relay contact close to a positive voltage in
transmit ( FT-301 series) .
Use a coax cable for the connection between the transceiver and the
FL -110 linear amplifier.
C A U T I O N
THE DRIVING POWER SHOULD NOT EXCEED 15 WATTS
UNDER ANY CIRCUMSTANCES.
DO NOT KEY THE FL- l lO WITHOUT THE PROPER ANTENNA
BEING CONNECTED.
THE COLLECTOR OF THE PA TRANSISTOR IS CONNECTED
TO THE POWER SOURCE AND DRAWS 5 MILLIAMPS WHEN
THE POWER SWITCH IS AT "OFF" POSITION. THEREFORE,
IT IS RECOMMENDED TO DISCONNECT POWER CABLE FROM
THE BATTERY WHEN THE FL-llO IS NOT BEING USED FOR
SEVERAL MONTHS.
POWt.A
POWER
ANT
COAX 502V/RG58/U
Figure
1
I ANTENNA
- 5 -
ANT
COAX 502V/RG58/U
Figure 2
I ANTENNA
I
I
I
_
DC ;J.5V
l
Summary of Contents for FL-110
Page 1: ... INSTRUCTION MANUAL FL 110 YAESU MUSEN CO LTD TOKYO JAPAN ...
Page 2: ......
Page 16: ...YAESU v 706 C ...