
DR-2X / DR-2XE Operating Manual
21
8. Set up DP-ID
Digital Personal Identification
(DP-ID)
Digital Personal Identification (DP-ID) is the digital ID number each transceiver is programmed with. The
system manager may operate the DR-2X/DR-2XE repeater functions, and the emergency communication, by
registering the DG-ID number of the controlling C4FM digital transceiver to the DR-2X/DR-2XE.
When receiving the uplink signal containing the DP-ID that is registered to the DR-2X/DR-2XE, the signal is
received and transmitted on the downlink preferentially. In addition, if connecting multiple repeaters via the
Internet, signals containing the registered DP-ID will be transmitted on the multiple repeater downlinks (the
local repeater signals may also be transmitted on the downlink.).
z
DP-ID feature
Emergency Transmission Feature
When the DR-2X/DR-2XE receives a signal from a transceiver with a registered DP-ID, the DR-2X/DR-2XE
operates in preference to all operations.
When the repeater DP-ID setting is ON, the signal containing a DP-ID from a C4FM transceiver may be
registered in the repeater DP-ID log.
1
Touch [
A SETUP
] or [
B SETUP
] to display the frequency set up screen, then touch [
F
] on the bottom of the
screen.
2
Touch [
ID MODE
] to select the “DP-ID”.
Touching
[
ID MODE
] switches the setting as follows:
à
“DP-ID”
à
“DG-ID”
à
“DP-ID”
à
The DP-ID display returns to the DG-ID display in about 5 seconds.
3
Keep touching [
ID MODE
] (DP-ID) for more than two seconds.
The DP-ID list screen appears.
8
4
D G - I D
T - O F F
R - O FF
S E T U P R X x . x x T X . x
S E T U P R X x . x x T X . x
4
Touch [
REG
].
The Registration Confirmation Screen appears for about 5 seconds.
5
Tune the registering transceiver to the repeater frequency, then trans-
mit in the C4FM mode.
• The call sign and Radio ID from the received transceiver are dis-
played.
D T M F
* 1 1 1 1
* 2 2 2 2
* 3 3 3 3
* 4 4 4 4
C O N T R O L M O D E
A C T I V A T E
D E A C T I V A T E
F I X D I G I T A L
A U T O
REG
D P - I D L I S T
DP-ID Registrasion?
6
Touch [
OK?
] to register Radio ID, or touch [
Cancel
] to return to the
DP-ID list screen without registering.
• If registering another transceiver, repeat step 4 to 6.
Up to 30 DP-ID information data may be registered.
7
Touch [
BACK
] 3 times.
The screen returns to the operation mode screen.
D T M F
* 1 1 1 1
* 2 2 2 2
* 3 3 3 3
* 4 4 4 4
C O N T R O L M O D E
A C T I V A T E
D E A C T I V A T E
F I X D I G I T A L
A U T O
REG
D P - I D L I S T
O K ?
Cance
DP-ID Registration
Radio ID:xxxxx
FT2DR
D T M F
* 1 1 1 1
* 2 2 2 2
* 3 3 3 3
* 4 4 4 4
1
A C T I V A T E
D E A C T I V A T E
F I X D I G I T A L
A U T O
REG
D P - I D L I S T
F T 2 D R x x x x x