Yaesu DR-1X, Technical Supplement

Page: 19 / 113

DR-1X/XE Technical Supplement
Alignment
ALIGNMENT-9
Center Meter Calibration
1. Set the RF signal generator to 440.050 MHz. Set
the generator for ±3.5 kHz deviation of a 1 kHz
modulation tone, and set the RF output level
from the signal generator to +10 dBμV.
2. Set the RX-MAIN-UNIT frequency to 440.050
MHz.
3. Press the
[
D
(
X
)
] key to select "FM".
4. Press t he [
P1
]
key of the Microphone to set the
alignment menu Item to " Adj 07 CTR/A ".
5. Press t he [
P3
] key
to save the new setting.
6. Set the transceiver frequency to 440.050 MHz of
the Band B.
7. Press the
[
D
(
X
)
] key to select "FM".
8. Press t he [
P2
]
key of the Microphone to set the
alignment menu Item to " Adj 07 CTR/B ".
9. Press t he [
P3
] key
to save the new setting.
To close the alignment mode, just turn the power
off by pressing and holding the
[
POWER
(
LOCK
)
]
switch for two seconds.
Press and hold in the
[
D
(
X
)
] and [
DISP
)
] keys
while turning the transceiver on.
The transceiver is now in the "Repeater mode".