5
iNSTALLATiON iNSTRUCTiONS
Mirror installation
– uses parts
A
thru
D
1�
Attach black Hook and Loop straps (Part B) to the
back of the Yada mirror by sliding the metal clip
into the mirror brackets. Push in all the way until
the straps are secure.
2. Make sure the connection for each strap is facing
the same way – rather up or down – to allow for
easy adjusting of the mirror.
3�
Open the Hook and Loop straps and allow them
to hang freely in the FRONT of the mirror, so there
is no obstruction between the Yada mirror and
your original rear view mirror.
4. Start by matching up the mirrors at the top, with
the spring clamps wrapping around the original
rearview mirror.
5. Pull the Yada mirror down to allow the spring
clamps on the bottom to snap into place around
the original rear view mirror. Tip: Use both hand
on either side of the mirror to snap into place
evenly. Make sure the mirror is centered before
snapping into place.
6. Once the Yada mirror is in place, reach behind and
one by one reattach the Hook and Loop straps
together to hold the Yada mirror tight in place.
