9
• Continue to run and tuck the Connection Cable to the front of the car and directly to the Monitor.
• Plug the other end of the Connection Cable into the port on the Monitor. Please note that the cable should
not wrap around the monitor, but should stay to the right of the Monitor and run down the interior on the
passenger side of your car. At no time should the Tiny Traveler™ Power or Connection Cable be loose or
dangling on the driver’s side of the vehicle.
Final Adjusting and Operation of the Tiny Traveler™
i. Now that the system is connected, sit in the driver’s seat and turn on your vehicle while remaining in
park.
ii. Turn on the monitor by pressing the POWER button on the top on the Monitor. The image from the
Camera will appear in the Monitor.
iii. You adjust the angle or the placement of the Camera so that the image of the baby seat is in complete
view on the Monitor.
iv. The brightness can be adjusted by pressing the + button on the top of the Monitor.
v. The Camera has infrared Night Vision. When the light becomes dark in the car or it is nighttime, you will
still be able to glance at your baby and see them clearly. The image color will look different due to the
night vision. The 6 red LEDs surrounding the camera lens will illuminate but no light will be shining on
the baby.
