8
6. Locate the closest available 12/24V socket and plug in the adapter.
7. Standing with the license plate in one hand and the Camera in the other hand, slide the Camera
along the top of the license plate in order to determine the placement. Best placement is in the
center of the license plate. If you have a rear hatch handle you may need to remove the Camera
bracket, turn the bracket upside down and reattach to the Camera. You would then mount the
Camera from the bottom of the license plate.
8. Peel off the lining of the double-sided tape already attached to the Camera and press firmly to
the license plate to secure the Camera. Make sure the back of the license plate is clean before
attaching double-sided tape.
9. Press the license plate and the Camera mounting firmly to the car to secure and get full contact
between the license plate and the double-sided tape. Screw the license plate back onto the rear
of your vehicle.
10. Once license plate and Camera are secure, you can adjust the vertical angle of the Camera to
your specific need.
11. As a last check, note the position of the view from the Camera when you place the vehicle in
reverse. Adjust the angle of the Camera as necessary to achieve the best rear view.
*If the 12/24V socket provides constant power, please unplug the Camera power adapter when the
vehicle is not in use.
*Please follow your local laws and regulations regarding constant monitoring while driving. It is
Attach
12V/24V Power
Adapter for Camera
Camera cable
