30
d) Check the weight of accessories attached to the sensor.
A total weight over 5.8g can submerge the sensor and
cause signal loss in consequence.
e) With relatively quite water areas, FC60X is able to obtain
a 130ft (40m) remote-control distance in maximum;
with significant fluctuations on water surface, the distance
may be reduced slightly. If the sensor is beyond the130ft
distance, signals will dispear.
Note:
Note: Pulling the sensor too fast or noticeably fluctuating
surfaces can be contributing factors to signal loss and
abnormal display.
To acquire most accurate information about the sea bottom,
try to drag the senor and the fishing rod slowly and at a
steady speed. (In case the fishing rod is too close to the
water surface or the thread tied to the sensor over-weighs,
the sensor may be caused to go down and the principal
machine is disabled to receive signals.)
