Safety Notes --- Important
The following important notes must be followed carefully to
use
the camera and respective
accessories in total safety. Before installing the camera, please read this manual carefully; when
installing please follow instructions of installation indicated in this manual. Please keep this manual
for future use.
The following installation should be performed by qualified service personnel or system installers
in accordance with all local
reulations
.
Before powering on the camera,
please check the power voltage carefully
. Make sure that
you
are using the right power source
or you may damage the equipment
.
Always store
the power cable, video cable and control cable in
secure
place.
Do not operate the camera beyond the specified temperature and humidity.
When transporting, avoid violent shak
ing
or force to the camera.
To prevent electric shock, do not remove screws or covers of the camera. There are no
self-serviceable parts inside. Refer to qualified service personnel for servicing.
Video cable and RS485 cable should be
a distance
away from other cables. Shielded and
independent
wiring is necessary for video and control cables
to work most effcetivly
.
Never aim the lens of the camera at the sun or other extremely bright objects
as
it may
cause
damage.
When cleaning the camera, use
a
soft cloth
so as not to damage the lens
. If the camera is very
dirty, wipe it off gently
with a soft cloth moistened with a weak solution of water and a neutral
kitchen detergent.
Squeeze
all liquid from the cloth before wiping the camera, then wipe off all
remaining dirt with a soft, dry
cloth. Use lens cleaning paper to clean the lens.
Do not move the camera module manually
. In doing so
could
result in malfunction of the
camera.
Do not hold the camera module when carrying the video camera
carry it by the base
.
Make sure the camera is far away from area where radiation, X-rays, strong electric waves, or
magnetism is generated.