Yacht Sentinel YS PRO, Manual

Page: 9 / 32

9
GETTING STARTED
Before starting the installation, make sure that you have all the included materials with you.
Choose a spot where you will install your YS PRO. A wired connection to the distribution board
and NMEA is needed. The screen will help you during the configuration. After that, all the system
is monitored through the app, a direct access to the YS PRO after installation is therefore not nec-
essary. This is why we recommend if possible to install your YS PRO in your distribution cabinet.
The 4 screw slots will help you fix the YS PRO on any surface.
Before its first configuration, YS PRO is in a “ shipping mode ” to save battery. The device will be
activated when first wired to a boat battery.
See p22 for more information about YS PRO modes .
Installation Guide