— 16 —
Table 1. Applicability of the programming methods
Number Setting or action
Method
[1]
[2]
[3]
(1)
NMEA 2000 device instance and system
instance
Yes
Yes
Yes
(2)
NMEA 2000 data instance
Yes
Yes
Yes
(3)
Type of a measured data (Thermometer
only)
Yes
Yes
Yes
(4)
Transmission interval for periodic messages
Note 1
Yes
Yes
(5)
Sensor reading offset
No
Yes
Note 3
(6)
Installation description
No
Yes
Yes
(7)
Reset all settings to factory values
Yes
Yes
Note 3
(8)
NMEA 2000 message priority
No
No
Note 2
Note (1): Only turning on with default transmission interval and off are
allowed with this method.
Note (2): Setting is not stored in non-volatile memory and acts only while
Device is powered.
Note (3): Not allowed with «Command Message» and «Write Fields» of PGN
126208, use method 2.
NMEA 2000 device and system instances (1) should not be modified by a user,
these fields are used by installers in complex NMEA 2000 networks. Message priority
(8) can be dynamically managed on the network by devices and is not intended
to be managed by a user.
Summary of Contents for YDTC-13
Page 36: ...36 Figure 2 Digital sensor of the Thermometer...
Page 40: ......
