EN 19
When you start the projector,please wait patiently for 2-3 seconds the projector will adjust
keystone automatically.if the image is not rectangle,you can Use the digital 4D keystone
correction to change the image to be rectangle.
When the projection screen is not rectangular, it can be adjusted by 4-point keystone
correction.
Step 1: Select the [ Settings ] menu-select [ Projection ] menu- press [ Manual Keystone ].
Step 2: Press the arrow keys on the remote controller or projector to adjust the horizontal or
vertical parameters, until the projection screen becomes the desired rectangle.
5.2 Automatic Keystone & 4-Point Keystone
5.2.1 Automatic Keystone Correction
5.2.2 Horizontal & Vertical Keystone Correction
1. Front projection Ceiling mount
2. Rear projection Ceiling mount
3. Front projection Desk mount
4. Rear projection Desk mount
OK Pick point : press the OK button on the remote controller or projector to enter the
adjustment interface.
Adjustment : Press the arrow keys on the remote controller or projector to adjust the
horizontal or vertical parameters.