USB Hexa Media Drive Users Manual
149313-02 Rev. D
Page 13
Access LED
2.4. How to operate on Macintosh
1) Inserting (mounting) a memory card
When you insert a memory card into the USB HMD, its corresponding mount LED on the
HMD lights up and its corresponding memory card icon appears on your desktop, which
indicates that you can access it. Insert a memory card in the correct orientation at proper
speed as far as it will go. If you insert it too slowly or stop it halfway, it may not be
recognized correctly.
untitled
The CF mount
LED lights up.
untitled
The SM mount
LED lights up.
untitled
untitled
The SD/MS
mount LED
lights up.
NOTE: Do not insert any memory cards while the access LED is lit.
2) Removing (unmounting) a memory cards
Important: This product does not provide a door
lock function or an auto eject function. When
removing media, first, perform the following un-
mount operation and check that the corresponding
media mount LED turns off and its icon disappears
from the desktop, and then manually pull out the
memory card from the HMD.
Un-mount operation
To un-mount a memory card, drag the memory card icon
and drop onto the Trash, or click the media icon and
choose [Eject Disk] from the [Special] menu of the
Finder.
