XYZlife BC1, Instruction Manual

Page: 15 / 25

FCC statement
Emission test Compliance Electromagnetic environment - guidance
Guidance and manufacturer’s declaration - electromagnetic Emissions
The BC1 ECG monitor is intended for use in the electromagnetic environment
specified below. The customer or the user of the BC1 ECG monitor should assure
that it is used in such an environment.
Recommended separation distances between portable and
mobile RF communications equipment and BC1 monitor
BC1 monitor is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The customer or user of the BC1
ECG monitor can help prevent electromagnetic interference by maintaining a
minimum distance between portable and mobile RF communications equipment
(transmitters), the BC1 ECG monitor as recommended below, according to
the maximum output power of the communications equipment.
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations /
flicker emissions IEC
61000-3-3
Group1
Class B
N/A
N/A
The device’ s RF emissions are very low
and are not likely to cause any interference
in nearby electronic equipment.
BC1 is suitable for use in all
establishments other than domestic
and those directly connected to the
public low-voltage power supply
network that supplies buildings
used for domestic purposes.
Rated maximum
output power of
transmitter (W)
0.01
0.1
1
10
100
0.12
0.38
1.2
3.8
12
0.12
0.38
1.2
3.8
12
0.23
0.73
2.3
7.3
23
Separation distance according to frequency of transmitter (M)
150 kHz to 80 MHz 80 kHz to 800 MHz 80 kHz to 2.5 GHz
13