P 1
HD23F1JS067
Compatible Model : da Vinci Jr. 1.0 3in1
Introducing the installation / detachment of the laser engraving module
Instructions for the laser engraving module
Please visit the official website of XYZprinting in order to obtain additional details on operational reminders,
application techniques, and maintenance information: http://www.xyzprinting.com
◆ Do not open the front door when the machine is running to prevent interrupting the laser engraving process,
as this would impact the integrity of the sculpted image.
◆ Do not look directly at the laser engraving process to prevent eye discomfort.
◆ Mild odors may be generated during the engraving process. We recommend working in a well-ventilated and
open area to ensure operational comfort.
◆ Please turn off the electric power when dismantling / replacing the laser engraving module.
◆ Defect reparation must be carried out according to the contents of this instruction manual. Where the defect
cannot be repaired, please contact your printer dealer or the customer service center.
Installing the laser engraving module:
Detachment of the laser engraving module
To release the extruder:
After removing the spool,
please select [CHANGE NOZZLE].
If the printer has filament inside,please “unload the Filament” first. Select [CHANGE SPOOL].
The Nozzle will back to the home position and
then turn off the power.
●
●
●
TURN OFF POWER
AND THEN CHANGE
NOZZLE MODULE
UTILITIES
CALIBRATE
BUILD SAMPLE
CHANGE NOZZLE
Press the white button at the
back of the extruder to release it.
◆ Connect the flat cable to the laser en-
graver. (Remind the flat cable direction.)
◆ Please select [CHANGE NOZZLE],then switch off the printer power.
◆ Press the white button at the back of the laser engraver to release it.
◆ Detach the connected cables.
◆ Complete dismantling and provide proper safekeeping of the laser engraver module.
◆ Align the laser engraver with the bracket
and press it to fix the holder.
Lightly press the spring around the feed hole and remove the
filament guide tube. Press on the harness chips and disconnect
the cable.