Operation
X-317™ Users Manual
Section 5: Operation
The X-317 can be operated using a web browser, by sending text commands to an XML status/control
page, and/or by sending Modbus/TCP requests.
5.1 Browser Operation
Once the X-317 is set up, users can access the Control Page using a web browser by typing the IP
address of the X-317 into the web browser address bar. For example, using the default IP address, the
user would enter http://192.168.1.2. If the IP address is changed from the default, the user must use the
new IP address. Note that if any port is used other than the default port 80, the port must also be
included in the request. For example, accessing the unit at port 8000 would be as follows:
The screen below appears when the Control Page is selected. In this example the
Display Raw Analog
Outputs
box has not been checked in the
Control Page Setup
tab and a simplified display is presented.
For the example below, the
Display Raw Analog Outputs
box has been checked in the
Control Page
Setup
tab. With this display additional engineering information is shown.
Page 38
Xytronix Research & Design, Inc.
Summary of Contents for ControlByWeb X317
Page 1: ......
