Features
•
Suitable for
lead free soldering applications • Variable temperature control via
LCD touch screen • Zero switching circuitry for spike suppression • High idle
stability • Fast heat recovery • Interchangeable handle • Three channels for
stored temperature presets
Introduction
Thank you for purchasing the soldering / de-soldering LCD touchscreen station
– the best solution for your soldering equipment needs especially for lead free
applications! We believe that you will be more than satisfied with many
features and the versatility of your new soldering station. Please carefully read
the instruction manual prior to operation to maximize the advantages of using
your new soldering station.
WARNING
: This appliance is not intended for use
by children or inform persons without assistance or supervision if their physical,
sensory or mental capabilities prevent them from using it safely. Children
should be supervised to ensure that they do not play with the appliance.
Failure to observe this safety regulation could result in a risk to life and limb.
The manufacturer or supplier shall not be liable for damage resulting from
misuse of the unit or unauthorized alterations
. Caution
: • Always place the
soldering and De-soldering
iron in its original holder when not being used. •
Keep the soldering and de-soldering tip and heating element away from the
body, clothes and flammable material when in operation. • The soldering tip
and the heating element remain hot for some time after being switched off.
Ensure that you do not touch th
e soldering tip and the heating element. • For
your health, do not inhale solder fumes. • You must not undertake work on live
parts. Only a technician is recommended to undertake repairs. Use original
replacement parts only.
Temperature setting function:
3 Temperature settings from CH1 to CH3
The setting method is as follows:
To select the function you want to set, first press the function selection key at
the bottom of the display screen to select
SOLDER or DESOLDER
. After the
selection is completed, the function indication key will point to the function you
selected. Please refer to the attached panel diagram.
--- Page 3 ----
