1
INTRODUCTION
Thank you for purchasing Xytronic’s high power soldering station – the best solution
for your soldering equipment needs especially for lead free applications! We believe
that you will be more than satisfied with many features and the versatility of your new
soldering station.
Please carefully
read the instruction manual prior to operate to
maximize the advantages of using your new soldering station.
WARNING:
This appliance is not intended for use by children or other persons
without assistance or supervision if their physical, sensory or mental capabilities
prevent them from using it safely. Children should be supervised to ensure that they
do not play with the appliance. Failure to observe the safety regulation will result in a
risk to life and limb. The manufacturer shall not be liable for damage resulting from
misuse of the unit or unauthorized alterations.
CAUTION:
◆
Always place the soldering iron in its original holder when not being used.
◆
Keep the soldering tip and heating element away from the body, clothes and
flammable material when in operation.
◆
The soldering tip and the heating element are still remaining hot after being
switched off. Ensure that you do not touch the soldering tip and the heating
element.
◆
For your health, do not inhale solder fumes.
◆
You must not undertake work on live parts. Only the technician is permitted to
undertake repairs. Use the original replacement part only.
KEY FEATURES
◆
HEATER/SENSOR FAILED DETECTION: If sensor circuit failed that the
display read “S--E” and cut off the heater power. If heater circuit failed the display
read “H--E” and cut off the heater power.
◆
TEMPERATUE “LOCK-OUT” FEATURE: The temperature can be locked by
“password” code that is convenient for production line management.
◆
ISOLATED IRON HOLDER WITH TIP CLEANER: Made of low abrasive
brass shavings instead of conventional sponges to meet RoHS requirement cleans
better and no water is necessary.
◆
LOW VOLTAGE OUTPUT WITH SAFETY OPERATION: The power unit is
isolated from the A.C. line by a transformer and allows 32Vac to drive the heating
element. Solder wand runs from 32 Volts for safety and with 100W power ceramic
heater for a super-fast heat-up and quick temperature recovery. The solder wand is
attached with heat resistant, non-burning, flexible
6-wire cord.
