Xyron XM2500 User Manual Download Page 10

Warranty Information

Xyron, Inc. warrants that the XM2500 is free from defects inmaterial and work-
manship for a period of one (1) year from the date of purchase. Xyron, Inc. will
repair or replace a defective product or part without charge, with proof of 
purchase. If the product is damaged by neglect or misuse, the warranty is null
and void.

To register your product online, please go to 

www.xyronpro.com

and click on

the product registration tab. 

*If you purchased this product outside the United States Xyron will warrant this 

product in accordance with the purchasing country’s laws.

Customer Service 

We want you to be happy with your purchase of a Xyron product. If for any 
reason you have a problem or a question, so please contact Xyron Customer
Service toll-free at 1-800-793-3523 or 1-480-443-9419 for help. You can also 
e-mail us at: [email protected]

For customer service outside of the U.S.
Australia: 61 2 8899 8500; [email protected]
New Zealand: 64 9 272 1600; [email protected]
Europe 44 845 67801801
Asia  813 5719 6450 

©2009 Xyron, Inc. 
8465 N. 90th St. Suite 6
Pima Center
Socttsdale, AZ 85258

Visit 

www.xyronpro.com

for more information

Summary of Contents for XM2500











Reviews: