Cut blade does not cut
Adhesive build-up on
Use caution and follow cleaning
smoothly.
cutting mechanism.
procedure listed below.
Film does not exit
Material is curled or
Remove material and clean
dispenser between upper
adhesive has been trans-
adhesive from rollers if necessary.
and lower blade bars.
ferred to the nip roller
Reposition material between
causing the film to stick
blade bars.
Film wrinkles don’t
Adhesive build-up on
Apply adhesive cleaner to
go away as crank is
idler bars.
remove build-up on idler bars.
turned clockwise.
Material will not
Material is not positioned
Reinstall cartridge. Slide input tray
advance when crank
between rollers or laminate
outward to release film and turn
handle is turned.
is adhered to input tray.
handleto assure laminate is
wrinkle-free. Slide input tray back
into machine.
Document wrinkles or
Adhesive build-up on front
Remove adhesive from front edge
exits machine crooked.
edge of input tray.
of input tray.
Document peels from
Improper peel technique
Use the proper peel technique
mounting surface at
introduces curl in document. of peeling the liner from the
opposite corners.
document as shown on the
previous page.
Troubleshooting
Symptom
Cause
Solution
How to Change & Maintain your Cut System
Using the finger tab of the cut bar spring, pull in and carefully remove the cut bar assembly from
the machine (be cautions of exposed). Using caution, apply adhesive cleaner to all surfaces of bar
blade. Once adhesive build-up is removed, return the cut assembly to the machine, guiding the
location pins into the holes in the side plates.
Warranty Information
Xyron, Inc warrants that the XM1255 is free from defects inmaterial and workmanship for a period
of one (1) year from the date of purchase. Xyron, Inc. will repair or replace a defective product or
part without charge, with proof of purchase. If the product is damaged by neglect or misuse, the
warranty is null and void.
To register your product online, please go to
www.xyronpro.com
and click on the product
registration tab.
*If you purchased this product outside the United States Xyron will warrant this product in accor-
dance with the purchasing country’s laws.
Customer Service
We want you to be happy with your purchase of a Xyron product. If for any reason you have a
problem or a question, please contact Xyron Customer Service toll-free at 1-800-793-3523 or
1-480-443-9419 for help. You can also e-mail us at: [email protected]
For customer service outside of the U.S.
Australia: 61 2 8899 8500; [email protected]
New Zealand: 64 9 272 1600; [email protected]
Europe 44 1895 878 700
Asia 813 5719 6450
©2009 Xyron, Inc.
8465 N. 90th St. Suite 6
Pima Center
Socttsdale, AZ 85258
Visit
www.xyronpro.com
for more information
