Top and bottom
Cartridge is not
Reinstall the cartridge making certain
laminating films are
squarely seated.
cartridge is seated. Make certain
not aligned.
output tray is completely pushed
forward and down.
Cut blade does not cut
Adhesive build-up on
Using caution, apply adhesive
smoothly.
cutting mechanism.
cleaner to all surfaces of top
blade bar and blade.*
Film does not exit
Material is curled or
Remove material and clean
dispenser between upper
adhesive has been trans-
adhesive from rollers if necessary.
and lower blade bars.
ferred to the nip roller
Reposition material between
causing the film to stick
blade bars.*
Film wrinkles don’t
Adhesive build-up on
Apply adhesive cleaner to
go away as crank is
idler bars.
remove build-up on idler bars.*
turned clockwise.
Material does not
No pressure between
Ensure output tray is completely
laminate or apply
upper and lower
pushed forward and down.
adhesive well.
nip rollers.
Laminate will not
Material is not positioned
Reinstall cartridge making sure the
advance when crank
between rollers or laminate
output tray is completely pushed
handle is turned.
is adhered to input tray.
forward and down. Slide input tray
Output tray not seated.
outward to release film and turn handle
to assure laminate is wrinkle-free.
Slide input tray back into machine.
Document wrinkles or
Adhesive build-up on front
Remove adhesive from front edge
exits machine crooked.
edge of input tray or output
of input tray. Make certain output
tray is not completely
tray is completely pushed forward
pushed forward and down.
and down.
Xyron Technical Hotline
1-800-793-3523 – USA
+45-7594-5866 – Europe
*Use Cleaning Kit Xyron #990 for adhesive removal.
THE PURCHASE OR ACQUISITION OF THIS PRODUCT DOES NOT CONFER THE RIGHT OR
LICENSE TO USE THE MACHINE AND CARTRIDGES IN THE RETROREFLECTIVE FIELD OR TO
MAKE OR SELL MACHINES OR CARTRIDGES FOR USE IN THE RETROREFLECTIVE FIELD.
Xyron, Inc. warrants that the Xyron Pro1250 is free from defects in material and workmanship for
a period of one (1) year from the date of purchase. Xyron, Inc. will repair or replace a defective
product or part without charge provided it is returned to the address below, freight prepaid with
proof of purchase. If the product is damaged by neglect or misuse, the warranty is null and void.
Xyron Inc.
15820 N. 84th Street, Scottsdale, AZ 85260
Xyron Europe A/S
Karetma Gervej 27, Fredericia, 7000, Denmark
Troubleshooting
Symptom
Cause
Solution
www.xyron.com
PART #1445.01
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
